Starterkit Raspberry Pi Model B 3B with CDrom and RAB holder

240 parts!

Starterkit Raspberry Pi Model B 3B with CDrom and RAB holder
Euro 29.95 Euro 24.95 *Prices include VAT
Article codeMAG-O-N
Starterkit voor Raspberry Pi 4 Model B 3B complete with RAB holder and cd with examples and lessons.

This kit contains a lot of parts but not a Raspberry Pi. Most components are also useable with other microcontrollers

Look at the picture for the contents of this kit

A small price for a lot of parts.
Op voorraad / on stock
Starterkit voor Raspberry Pi 4 Model B 3B complete with RAB holder and cd with examples and lessons.

This kit contains a lot of parts but not a Raspberry Pi. Most components are also useable with other microcontrollers

Look at the picture for the contents of this kit

Contains 11 Lessons:

1.Bit digital tube display 2. Water light with 74HC595 3. Raspberry Pi Drive Active Buzzer

4. Raspberry Pi button control LED 5. Raspberry Pi works with DHT11 temperature and humidity module

6.IR Remote Control with Raspberry Pi 7.Raspberry Pi with 1602 LCD Screen 8. Raspberry Pi with Flashing LED

9. Raspberry Pi Drive Passive Buzzer 10. Raspberry Pi with RGB module 11. Raspberry Pi sends the servo on

Package includes:

1x T-type GPIO expansion card 1x power module

1x DHT11 Temperature and Humidity Sensor Module

1x 1602 LCD module 1x servo motor 9G 1x infrared remote control

1x 74HC595 4x diode rectifier IN4001 2x 7-segment display

2x NPN transistor BC547 2x PNP transistor BC557 1x RGB LED

5x LED red 5x LED green 5x LED yellow 5x LED white 1x passive buzzer

1x active buzzer 1x potentiometer (10k) 1x IR receiver 1x switch

5x knob 4x capacitor ceramic 100nF 4x capacitor ceramic 10nF

65 x connecting thread, 1 x 830 breadboard, 1 x bus-to-plug Dupont wire, 20 pin

1x GPPO Cable 1x 9V Battery Buckle 1x Blue RAB Holder

10 x resistor (1K, 2K, 5.1K, 10K, 100K, 10R, 100R, 220R, 330R, 1M) 1x Raspberry Pi GPPO reference card

1x resistance card 1x Phillips screwdriver 4x M3 * 6 + 5 screws 4x PWM2 * 6 + 5 screws

4x PWM2 * 4 + 5 screws 3x M2 * 4 + 3 copper nuts 1x CD